KVH Industries TracPhone V7 Replacement Instructions page 5

e. Press ACCEPT to start gyro calibration.
DO NOT MOVE VESSEL
DURING CALIBRATION
CALIBRATING GYROS
AZ: EL:
f. Verify that the azimuth (AZ), elevation (EL), and skew
gyros all pass ("P"). If any gyro fails ("F"), retry the
calibration. If it continues to fail, please contact KVH
Technical Support.
CALIBRATING GYROS
AZ:P EL:P
g. Once the gyros are calibrated, the antenna restarts. Wait
five minutes for system startup.
The PCB replacement process is complete!
PCB Replacement Instructions
SKEW:
SKEW:P
TracPhone V7
5