Assembly And Installation - Kogan 7 Series Quick Start Manual

ASSEMBLY AND INSTALLATION

BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.
1. Stand assembly
a. Attach stand to base of TV.
b. Insert two 15mm screws and use Phillips head screwdriver
(not supplied) to tighten.
c. Repeat these steps for second stand.
1a
2. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity
markings (+ / -) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
2a
6
1b
2b
1c
2c
LAN HDM