Table of Contents
Advertisement
Wind the rope tightly around drive pulley. When pulled, pulley must
rotate counterclockwise.
A19D13A
TYPICAL
1. Clip
Pull the rope using a sharp, crisp pull so the rope comes free of the drive
pulley.
Start engine as per usual manual starting.
When starting the snowmobile in an emergency situation, us-
ing drive pulley, do not reinstall the belt guard and return slow-
ly to have snowmobile repaired.
Shutting Off the Engine
Release throttle lever and wait until engine has returned to idle speed.
Shut off the engine using either engine cut-out switch or tether cut-
out switch.
Always remove tether cord cap when vehicle is not in opera-
tion in order to prevent accidental engine starting or to avoid
unauthorized use by children or others or theft.
WARNING
WARNING
1
105
Advertisement
Table of Contents
