LevelOne FCS-5044 User Manual page 60

Network Camera User's Manual
Q7
Infrared led does not light up?
A7 Check 「 Configuration>Audio and Video>Infrared LED Control 」 is "Auto" or
"Manual》Turn on".
Q8 The network camera cannot focus accurately.
A8
(1) The lens is dirty or dust is attached. Clean the lens with lens cleaner. And then adjust
the camera focus manually.
(2) The image may be out of focus. If the object is too near, move the object away from
Network Camera.
Q9 The cover of network camera is warm. Is it normal?
A9 Network camera is a precision device. The internal material has the operational
temperature, and it is normal when user touch the cover feels warm. It is recommended
to put the network camera at aired place, and not put at any other device.
Q10 The process of upgrade firmware abort.
A10 Contact your dealer for further help.
Q11 Cannot access the login page and other web pages of Network Camera
from Internet Explorer
A11
• May be due to the network cable. Try correcting your network cable and configuration.
Test the network interface by connecting a local computer to the Network Camera via a
crossover cable.
• Make sure the Internet connection and setting is ok.
• Make sure enter the IP address of Internet Explorer is correct. If Network Camera has
60/63