Table of Contents
Advertisement
Network Camera User's Manual
Camera control
The pan and tilt functions can be controlled with these buttons. The
controls the camera to the left; the
camera accordingly.
(1) "UL"
"UR"
"LL"
,
,
"Home"
And
button controls the camera to the center.
(2) "Zoom times display"
when you zoom in/out as shown in the illustration above.
(3)"Pan angle"
This sets the range of the horizontal movement of the camera. The
larger value is setting, the larger movement of
camera.
(4) "Tilt angle"
This sets the range of the vertical movement of the camera. The
larger value is setting, the larger movement of
camera.
(5) "Zoom step"
(6) "Focus step"
(7) "Patrol cycle"
(8) "Patrol speed"
the faster speed will run by the camera.
(9) "Auto pan speed"
setting, the faster speed will run by the camera.
Preset and patrol setting
"Preset setting"
"Preset point name"
(1)
enable the settings. The preset positions will be displayed under the Preset
Location list on the left-hand side. The camera allows for 20 preset locations.
(2)To remove a preset position, select its checkbox from the drop-down list and
click Remove.
"Patrol setting"
(1) Click to select one or multiple preset locations by checking their checkboxes.
(2) Click the >> (Move) button to move them to the Patrol list.
(3) Click to select a position, and manually enter a Dwelling time for the camera
to stay during an auto patrol. The default value is 10 seconds.
(4) If you want to delete a selected location, select it from the list and click
Remove.
(5) Select a location and click Up or Down to rearrange the patrolling order.
(6) Click Save to enable the settings.
Home position and auto pan range setting
(1) "Home position"
--"Set default value as home position"
default's home by clicking on this button.
--"Set the current position as home position"
current aimed position as home of the Network Camera. Each time the Network
Camera reboots or finishes calibration, it will automatically aim to the defined home
position
(2) "Auto pan range"
"Right"
"LR"
and
buttons control the camera to an oblique angle.
The zoom indicator will be displayed on the screen
Set steps of zoom move.
Set steps of focus move.
It is the cycle of patrol function.
This defines the speed of auto patrol. The larger value is setting,
This defines the speed of auto panning. The larger value is
Enter a name for the preset position. Click Add to
45/63
"Up"
"Down"
,
, and
"Left"
"Right"
or
"Up"
"Down"
or
Restore home position to original
Click on the button will set the
"Left"
button
buttons control the
is performing by the
is performing by the
Advertisement
Table of Contents
