Table of Contents
Advertisement
Network Camera User's Manual
Video codec setting
(1) "Select Stream"
(2) "Codec type"
compression mode: "H.264" or "MPEG4‖ or "MJPEG". User can choose one of
these compression modes based on requirement or application
(3) "Video size"
(4) "Frame rate"
frame rate higher for a smoother video quality.
(5) "Intra frame period"
the duration, the more likely you will get a better video quality, but at the cost of
higher network bandwidth consumption.
(6) "Video Quality type"
-- "
Constant bit rate
Mbps.
-- "
Fixed quality
according. The ―Quality‖ are selectable at the following rates: From 1 to 20.
Snapshot and time display setting
Adjust the photo size specifications and choose whether to mark time on
the video and photo.
The Network Camera supports "Stream 1"and "Stream 2".
The Network Camera supports three kind of video
Click the down arrow to choose the quality of image
This limits the maximal refresh frame rate per second. Set the
Determine how often to plant an ―I frame‖. The shorter
Setting optimizes bandwidth utilization and video quality.
" User can adjust the video quality from 20 Kbps to 12
" user can select from highest quality to get best quality
43/63
Advertisement
Table of Contents
