Table of Contents
Advertisement
Network Camera User's Manual
2. White Balance
In the bottom of White Balance, there are 5 modes for practice: ATW, AWC, Indoor,
Outdoor and Manual modes. Set the Red Gain and Blue Gain are active.
3. Image Adjustment
Brightness
The brightness can make the image brighter or darker. The neutral value is 0.
Saturation
The saturation can change white content in the image. The neutral value is 128.
Contrast
The contrast can adjust difference between dark and light. The neutral value is 0.
4. Noise Reduction
Check the box Enable to enable 3D de-noise. There are 5 modes: 2D, 2D 1-ref , 2D
2-ref , 3D, and Blend. The modes 2D, 2D 1-ref , 2D 2-ref have a Normal Strength slide
bar for adjustment. The mode 3D has a Motion Adaptive option, Current Weight and
Reference Strength slide bars. The mode Blend has all adjustable parameters. The
difference etween the modes 2D 1-ref and 2D 2-ref is one or two frames as temporal
reference frames. When the scene with motion objects, the mode 3D and Blend may
perform better without blur or ghost. When the Current Weight is higher and the
35/63
Advertisement
Table of Contents
