Network Camera User's Manual
Access list
General Settings
"
"
Filter type
: Provided to Allow or Deny mode.
"
Always allow the IP address to access this device
and add the Administrator's IP address in this field to make sure the Administrator can
always connect to the device.
Filter setting
"
Add a rule to configure an Allowed/Denied list
Allowed/Denied list.
There are three types of rules for user to set up:
"Single"
This rule allows the user to add an IP address to the Allowed/Denied list.
For example:
"
:
"
Click ―Save‖ to add a rule to
:
31/63
You can check this item