Elation KL Panel KLP001 User Manual page 14

I N S T A L L A T I O N I N S T R U C T I O N S
JUNIOR PIN
1. Loosen the yoke adjustment knobs, and adjust the mounting yoke to a position that allows access
to both the top and bottom sides of the yoke. Re-tighten the yoke adjustment knobs to lock the
yoke in position.
2. Locate the notched face of the junior pin, and hold it against the clamp mounting point located
on the top side of the yoke. The notched surface of the junior pin must sit flush against the
matching groove on the surface of the clamp mounting point.
14