Advertisement
HYDRAULIC CYLINDER [F] TO MAIN SUPPORT FRAME ASSEMBLY [A]
1. Lock all Swivel Caster Brakes by pressing downward on the "ON" tab
of the Lock Pedal.
2. Remove the Lock Pin, Washer and Clip from the holes through the
through holes of the Main Support Frame Assembly [A] and set aside
for later replacement.
3. Remove the M16 x 90mm shoulder bolt, Locknut and Washer from
the mounting plates of the Main Support Frame Assembly [A] and set
aside for later replacement (FIG 13).
4. Set the lower clevis mount of a Hydraulic Cylinder [F] between the
mounting plates of the Main Support Frame Assembly [A] and locate
it with the previously removed M16 x 90mm shoulder bolt. Secure
it with the M16 locknut and washer and tighten with two 24mm
wrenches (not included) (FIG 14). NOTE: Do Not allow the Hydraulic
Cylinder [F] to fall forward.
SPINDLE SUPPORT ARM [E] TO MAIN SUPPORT FRAME ASSEMBLY [A]
AND HYDRAULIC CYLINDER [F].
1. Remove the M16 x 80mm Locknut and Washer from the cylinder
mounting plates at the underside of the Spindle Support [E] (FIG 15)
and set aside for reinstallation.
2. With the Latch Pin facing forward, slide the square tube post of the
Spindle Assembly [H] & [D] down into the larger square tube upright
of the Main Support Frame [A] (FIG 16).
3. Align the pivot hole in the Hydraulic Cylinder ram with the through
holes of the Spindle Support [E].
NOTE: The Hydraulic Cylinder may need to be extended or retracted to
allow the holes to align (FIG 16).
4. Insert the previously removed M16 x 80mm Shoulder Bolt through the
Hydraulic Cylinder ram and anchor plates then secure in place with
the M16 Locknut and Washer. Tighten with two 24mm wrenches (not
included).
5. Raise or lower the Hydraulic Cylinder ram as needed to align the
through hole of the Main Support Post [A] with the nearest of the
7 holes in the Spindle Support post [E] then insert the previously
removed Lock Pin, Washer and Clip.
8
FIG. 13
FIG. 14
FIG. 15
FIG. 16
""""
F
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
"
"
"
"
E
"
"
"
"
A
Advertisement
