Advertisement
ATTACHMENT ARMS [R] TO SUPPORT "TEE" BEAMS [D].
1. Slide the larger open square tube of the Attachment Arm over the
lesser square tube of the Support "Tee" Beam (FIG 25).
It is extremely important that the Attachment Arms
be set at an equal distance from the centerline of the
Support "Tee" Beam when mounting a vehicle body to
avoid a dangerous out of balance condition.
2. Once a method for attachment to vehicle body has been determined,
tighten the Lockbolts with a 21mm wrench (not included) (FIGS 26
& 27).
The Eastwood Rotisserie is now ready for use (FIG 28).
FIG. 26
FIG. 28
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 25
R
FIG. 27
R
11
Advertisement
