Advertisement
ASSEMBLY
The two End Assemblies of the Rotisserie are mirror images of one another (Fig 1). All steps described for assembly will be
repeated for the opposite side.
To prevent scratches and damage to the finish of the Rotisserie components, it is strongly advisable to use cardboard, carpet,
blankets etc. covering a minimum 10' x 10" area before beginning assembly.
CASTERS [C] AND CASTER ARMS [B] TO MAIN SUPPORT FRAME [A]
1. Place the Main Support Frame Assembly [A] with the Vertical Post
with Roller standing upward (FIG 1).
2. Attach a Locking Swivel Caster [C] to flange of Main Support
Assembly [A] using four M10 x 25mm Bolts, Washers, Lockwash-
ers and Nuts. Tighten securely using two 17mm wrenches (not
included) (FIG 2).
3. Attach Locking Swivel Casters [C] to flanges of Caster Arms [B]
using four M10 x 25mm Bolts, Washers, Lockwashers and Nuts
(FIG 3). Tighten securely using two 17mm wrenches
(not included).
4. Insert two assembled Caster Arms with Casters [B] & [C] into the
open tubes of the Main Support Frame [A] at the proper indicated
depth at 4" [10cm] from the ends (FIG 4) and tighten clamping
screws with a 19mm wrench (not included).
FIG. 3
C
To order parts and supplies: 800.343.9353 >> eastwood.com
B
FIG. 1
FIG. 2
FIG. 4
B
C
A
C
A
C
B
A
C
5
Advertisement
