Advertisement
SAFETY INFORMATION
• Awkward, out of balance body positions may be attempted while trying to reach specific areas of objects placed on the Rotisserie dur-
ing use. Failure to ensure proper footing can quickly result in a fall which could inflict serious personal injury or property damage.
• This Rotisserie has moveable components that can crush and pinch. Keep fingers and hands away from pinch points when operating.
ASSEMBLY PREPARATION
INJURY HAZARDS!
The Eastwood Rotisserie consists of heavy metal components which can cause potentially serious injuries if allowed to drop.
Avoid pinching hands while handling parts during assembly.
• Obtain the assistance of a helper during assembly. DO NOT attempt to construct this Rotisserie without assistance!
• The use of ANSI approved safety shoes, head protection gear and eye protection is necessary.
• Perform assembly in a large, uncluttered area close to area of intended use.
• Allow sufficient area for operator and helper to remain clear when choosing operating area.
• Use only on a firm, smooth, level and clean work surface.
DO NOT use on a sloped or rough textured surface, earth, grass, sand, gravel or any other loose surface.
• DO NOT attempt to move Rotisserie on sloped surfaces while loaded.
• DO NOT exceed the maximum length of 18' [5.5m] (as measured between faces of the Support Arm "Tee" Beams).
4
FALL HAZARD!
PINCH/CRUSH HAZARD!
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
Advertisement
