Parts Enclosed In Carton; Preparation - Child Craft Legacy Crib Assembly Directions And Parts List

Single dropside crib/daybed & drawer with hidden hardware factory

Hide thumbs

Table Of Contents

Table of Contents

(1) Stabilizing Bar

(1) Dropside

wide

end

rail on

each

end

conceals

Hidden

Hardware

(1) Stationary Side

(2) Drawer Rails

E E

F F

(2) Drawer Ends

(1) Drawer Rail-Right

(1) Drawer Rail-Left

L L

Carefully remove and lay out all hardware and parts. During the assembly process whenever using screws or bolts (fastening

devices), check each with this hardware list, by letter and size identify by placing each fastening device on the diagram of the

item which is sketched actual size. Be sure to use the proper size specified in the assembly directions. Hardware Bag may contain

extra fastening devices. Check quantities and match to Hardware Bag and Carton Parts Lists. If a part is missing or broken

contact your dealer or Legacy, 812/ 883-3111, (FAX 812-883-1819), service@childcraftind.com for a replacement part or

instructional literature. Before making this contact identify your crib. Model Identification numbers are stamped on a label attached

to the inside face of Footboard Z bottom rail. Record the complete model identification number now: #____________________.

Include this number with a request for a part or literature for your crib. DO NOT SUBSTITUTE PARTS!

THIS CRIB CONFORMS TO APPLICABLE REGULATIONS PROMULGATED BY THE CONSUMER PRODUCT SAFETY

COMMISSION AND THE AMERICAN SOCIETY FOR TESTING AND MATERIALS VOLUNTARY STANDARD IN EFFECT AT

DATE OF MANUFACTURE AND IS CERTIFIED BY jpma and astm.