Advertisement
Quick Links
Fully Framed TA50 LOCKER – KD
Assembly Instructions
Fasteners & Tools Needed
The following items are in the hardware kit
shipped with the locker:
8615–Number plate
8671–Aluminum Rivet
8621- Steel rivet
8709-Screw
8696- Coat Hook,
8717 Coat Rod Hook
6CR___-Coat Rod
You will need these tools to assemble the TA50
locker.
Rivet gun.
Drill with #3 Philips bit
Flat blade and Phillips head screwdrivers.
Stepladder
www.pencoproducts.com
STEP 1- Check Parts
Unpack the component pieces for the basic locker.
You should have two sides, a back, a top, shelf, coat
rod hooks, coat rod, coat hooks, and bottom, for the
locker body. You should also have a left hand and a
right hand door.
PENCO PRODUCTS, INC
|
800-562-1000
|
Fax: 800-248-1555
1820 Stonehenge Drive, Greenville, NC 27858
|
general@pencoproducts.com
Advertisement
Related Manuals for PENCO TA50
Summary of Contents for PENCO TA50
- Page 1 You should also have a left hand and a 6CR___-Coat Rod right hand door. You will need these tools to assemble the TA50 locker. Rivet gun. Drill with #3 Philips bit Flat blade and Phillips head screwdrivers.
- Page 2 Fully Framed TA50 LOCKER – KD Assembly Instructions Note- Assemble locker upside down to allow screw insertion into underside of locker bottom. Images shown may differ from your locker, as there are different configuration options. Some parts show with transparency in these instructions to add clarity to assembly.
- Page 3 Fully Framed TA50 LOCKER – KD Assembly Instructions 2B-2 With the back inserted install one 8709 screw on each side of the back about half way up. Note holes are to align to make sure back is in proper position.
- Page 4 Fully Framed TA50 LOCKER – KD Assembly Instructions 2C-1 Insert cast corner pieces of locker bottom into the side channels. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 5 Fully Framed TA50 LOCKER – KD Assembly Instructions 2C-2 Install one screw into each corner of the locker bottom as shown. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 6 Fully Framed TA50 LOCKER – KD Assembly Instructions 2D- Next install one screw into the locker top in each corner as shown. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 7 Fully Framed TA50 LOCKER – KD Assembly Instructions 2E- Now rotate locker body so the bottom is on the ground. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 8 Fully Framed TA50 LOCKER – KD Assembly Instructions 2F-Install screws to locker back at U cut locations (6 inch intervals) on each side. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 9 Fully Framed TA50 LOCKER – KD Assembly Instructions 2G-1 Install mounting rails for shelf using one 8607 screw in the front upright and back upright. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 10 Fully Framed TA50 LOCKER – KD Assembly Instructions 2G-2 Insert shelf and attach shelf to rails using one rivet in each corner. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 11 Fully Framed TA50 LOCKER – KD Assembly Instructions 2H-Now install 8696, 8717 coat hooks, and coat rod using two rivets per hook. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 12 Fully Framed TA50 LOCKER – KD Assembly Instructions PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 13 Fully Framed TA50 LOCKER – KD Assembly Instructions 2I-Install doors using 8621 rivets at each hole location on hinge. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
- Page 14 Fully Framed TA50 LOCKER – KD Assembly Instructions Assembly is now complete. Lockers to be floor and wall anchored before use. PENCO PRODUCTS, INC 1820 Stonehenge Drive, Greenville, NC 27858 www.pencoproducts.com 800-562-1000 Fax: 800-248-1555 general@pencoproducts.com...
Need help?
Do you have a question about the TA50 and is the answer not in the manual?
Questions and answers