3. Plug the TAL-3100R into an 110VAC 10 AMP Grounded outlet. 4. Connect the labeler to a sufficient air supply. Minimum 80 PSI clean dry air. Note: The TAL-3100R typically operates around 30 PSI depending on the label. Label Threading: Remove outer unwind disc (48) install new roll of labels and replace disc.
Page 3
Teaching the photo eye: 1. It is recommended that you teach the photo eye (14) with every new roll of labels used. 2. Remove one label from the webbing and place the webbing only in the photo eye. 3. Press and hold the “Normal” button on photo eye for 3 seconds. When the lights finish flashing the photo eye is taught.
Label Setup: The label advance potentiometer resides on top of the TAL-3100R electrical housing. The purpose is to adjust the stopping position of the label with respect to the peel plate. With the label advance pot turned all the way counterclockwise the photo eye will stop the applicator instantly when it senses a gap.
Page 5
Product Carriage Setup 1. Keeping the product carriage table (34) level, raise or lower the product carriage by loosening the ratchet handles (2). With the Air System Disconnected raise the carriage to make contact with the Product Drive Roller (30). 2.
Page 6
Recommended Spare Parts List TAL-3100R: Qty. Description Part # Pinch Roller 31002 Waist wind Clip 45131 Drive V Belt 21031 Timing Belt 31834 Unwind Disc 45136 Label Drive Motor 76800 Feed Head Motor 31839 Rubber Drive Roller 31408 Foot Switch...
Page 9
TAL-3100R Parts List Part # Description Item # 11004 Roller Support Bracket 11007 Carriage Ratchet Handle 11008 Unwind Shaft 11010 Carriage Bolt 11016 Waste Wind Shaft 21031 Gates Drive Belt 21026 Motor Spacers 21027 Left Torsion Spring 21028 Right Torsion Spring...
Page 10
40007 On/Off Switch 45131 Clip 45136 Unwind Disc 45155 Fuse Holder 45157 Fuse 45217 Power Cord 72618 Felt Pad 76800 Heavy Duty Motor 31839 Feed Head Motor (No Brake) 81912 Small Cord Grip 21011 Idler Roller 30124 Filter Regulator Page 10 of 15...
Optional Accessories All Purpose Carriage: The All Purpose Carriage provides greater flexibility and adjustability that the standard bottle carriage. It is especially useful for larger bottles or containers that have lips or ridges that can affect how the bottle rotates in the carriage. LION 6300 and 8200 Clear Label Photo Eye: 1.
Page 12
Registered Ink Imprinter: The registered ink imprinter allows you to imprint an alphanumeric code on the label prior to application to the bottle. This is commonly used for batch codes, expiration dates, or lot codes. To adjust the printing location left to right on the web. Loosen two knobs and slide coder •...
Page 13
Tapered Product Carriage: The Tapered Product Carriage is designed to assist in the application of labels to tapered bottles. For the tapered carriage to work properly the label must be crescent or arched in shape and match the taper/angle of the bottle. 1.
Page 15
5. The unit is now be ready to apply the first label. If the first label is not applied square to the bottle, utilize the adjustment screws (A) to make minor adjustments. ½ of a turn on the screw will make a large difference in how the label is applied. Front and Back Label Option Setting First Label Advance: Turn both label advance dials counter clockwise to 0.0.