Disposal; Cleaning; Interference; Using The System - General Sleep Zmachine Synergy Patient Manual

If, at any time, the Zmachine or accessories are thought to be damaged
or malfunctioning, stop using the Zmachine and contact your healthcare
provider for further instructions.
Some patients may experience skin irritation, hypersensitivity, or
allergic reaction to the self-stick sensors or adhesive tape. If this occurs,
stop using and contact your healthcare provider for further instructions.
Do not connect the Zmachine to any equipment except as described in
this guide.
Do not modify the Zmachine and/or open Zmachine enclosure for any
reason. The Zmachine contains no user serviceable parts.
The cannula and other sensor wires can leave temporary marks and/or
indentations on your face and skin.

Disposal

Dispose of any used sensor pads, alcohol swabs and cannulas. Return all
other parts and accessories to your Healthcare Provider.

Cleaning

The outer surfaces of the Zmachine Synergy will be cleaned by your
healthcare provider. If you need to remove fingerprints or dirt, use a small
amount of water or isopropyl alcohol to dampen a soft cloth and wipe the
surface clean. Do not immerse the Zmachine or allow any liquid to enter
the case.

Interference

The Zmachine acquires and analyzes very small electrical signals from
your body and brain. Because of this, equipment that generates strong
electrical fields (such as electric blankets) should not be used with the
Zmachine.

Using the System

Closely perform the steps beginning on the next page to help ensure a
comfortable night and a great recording.
Patient Guide
Contraindications, Warnings and Cautions
5