Stopping The Test - General Sleep Zmachine Synergy Patient Manual

Stopping the Test

Press the button for about 3-4 seconds until the system beeps, then
release. All lights will glow orange, then turn off.
Unhook yourself from the system.
Remove finger probe and tape
•
Remove nasal cannula and tape
•
Remove sensor pads
•
Unsnap effort belt cable
•
Unbuckle effort belt
•
Remove any gel and/or adhesive remaining on your skin from
•
the tape and sensor pads using soap & water or an alcohol swab
Place all parts and accessories into the travel case (except
•
Cannula and Sensors Pads)
Return all equipment as instructed.
14 Patient Guide