Configuring Thermostats - Verdant VX-TR Network Installation

12

configuring thermostats

Once the thermostat is powered, thermostat configuration settings will
appear on the thermostat screen.
In order to properly operate the PtAc unit:
Set the thermostat clock;
➤
enter the room number;
➤
configure the equipment settings;
➤
Select energy Savings Preset;
➤
CONFIGURATION
BUTTON
NOTE: You can access Thermostat
Configuration settings by pressing
the "Configuration" button.
Use the "Up" and "Down" buttons to change the setting;
➤
➤ Press the "Fan" button to advance to the next setting;
Press the "F/c" button to advance to the next configuration screen;
➤
Press the "Power" button to save and exit configuration;
➤
NOTE: If the thermostat is connected to a network, the equipment and
the energy saving settings configured on the thermostat will be ignored
and the settings configured on the Remote Management Website will be
applied.
Verdant VX-tr Network Installation