Visibility From Operator's Seat - Komatsu D61EX-24 Operation & Maintenance Manual

FOREWORD INTRODUCTION

VISIBILITY FROM OPERATOR'S SEAT

The visibility of this machine required by visibility standards (ISO 5006) are shown in the drawing below.
Proximity visibility
This machine maintains a proximity visibility of a height of 1.5 m {4 ft 11 in} at a point 1 m {3 ft 3 in} away from
the outside surface of the machine.
12 m radius visibility
The figure below shows a visibility from the machine for a radius of 12 m {39 ft 4 in}. Shaded area (B) in the
figure shows an area whose view is blocked by a part of the machine when the machine is equipped with the
mirrors and other visibility assistant devices. Be fully aware that there is an area where the operator cannot see
when operating the machine.
1-5