Method For Lubricating Equalizer Bar Center Pin - Komatsu D61EX-24 Operation & Maintenance Manual

MAINTENANCE PROCEDURE

METHOD FOR LUBRICATING EQUALIZER BAR CENTER PIN

(1 place)
1.
Clean the grease fitting shown by arrow.
2.
By using a grease pump, pump in grease through the
grease fittings.
REMARK
Lower the blade until the idler is raised 1 to 2 cm {0.4 to
0.8 in} from the ground and perform lubrication. The
grease will fill the whole circumference of the pin.
4-44
MAINTENANCE