Related Manuals for Gunter & Hauer EOM 558 BT
Summary of Contents for Gunter & Hauer EOM 558 BT
- Page 1 Gunter & Hauer Instruction Manual Built-in Oven EOM 558 BT EOM 557 WTEL EOM 557 BTEL...
-
Page 2: Table Of Contents
Content Important safety information Installation Prior to start up of the appliance Selecting a cooking function and temperature Troubleshooting Maintenance and cleaning Environmental note... -
Page 3: Important Safety Information
Important safety information This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance. - Page 4 and/or steam, proceed with your cooking. Keep doors closed at all time unless necessary for cooking or built into a standard kitchen cabinet or cleaning purposes. housing unit. ● ● nly use utensils that are suitable for MPORTANT: The adjacent furniture or use with ovens.
- Page 5 details shown on the appliance rating ● ake sure to keep children away from label. the appliance, children should be ● ever use a damaged appliance! supervised to ensure that they do not play with the appliance. It might be Disconnect the appliance from the dangerous to allow the children to touch power source and contact your supplier...
- Page 6 ● eans for disconnection must be incorporated in the fixed wiring in Safety: accordance with the wiring rules. To achieve this install appropriate switched ● ttention, the glass is extremely fused connection unit. fragile.Always wear gloves when ● ote! A switched fused connection unit handling.
-
Page 7: Installation
appropriate for the food that you are sized dish and that you use the drip tray cooking. You should also ensure that where appropriate. the food is placed in an adequately Installation Electrical connection Before connecting the appliance, make sure that the supply voltage marked on the Rating Plate corresponds with your mains supply voltage. - Page 8 Positioning the appliance Ensure that the aperture that you will be fitting the oven into is of the size given in the above diagram. The oven must be fitted into an oven housing with the ventilation cut-outs shown in the “Ventilation requirements”...
-
Page 9: Prior To Start Up Of The Appliance
Ensure that the oven has been securely fixed into the housing unit. The fixing of the oven into the housing is made by using four screws. These should be screwed through the oven cabinet and into the housing unit. Prior to start up of the appliance ... - Page 10 6) “Auto” function symbol 7) Oven in use symbol 8) clock symbol/“Minute minder” symbol 9) Decimal point symbol Setting and using the oven programmer /timer Before first use To remove any residue from the oven that may have been left from the manufacturing process, you should select the fan oven function and set the thermostat to its maximum temperature setting.
- Page 11 Status switching diagram Timer function mode switching Long press program button “M” for 3s enter to system time setting status, without any operation after 5S,system time, oven in use symbol “ ” and decimal point symbol “ ” keep bright display; you can circularly switch the oven timer function mode by program button “M”.
- Page 12 When the display is flashing, press “ ”for 3 seconds to start up the oven. Then oven in use symbol“ ”lights up and decimal point symbol “ ” twinkles. When decimal point symbol “ ” twinkles, press “ ”or “ ”...
- Page 13 Pic 9 Alarm clock setting initial state Pic 10 Alarm clock well set (alarm clock icon flickering) (alarm clock icon flickering) After choosing the time , lift the finger off the buttons and wait for 5 seconds, then the alarm clock icon“...
- Page 14 Cooking time setting function In the state of function to be selected, press button“ ” 3 times, then the icon “AUTO” and oven in use symbol icon “ ” twinkle. The screen shows the cooking time（First set default display “0·00”）,cooking time and decimal point symbol “ ”...
- Page 15 extinguish“Auto” function symbol.Like Pic 18. Note 1：Cooking time setting range is 0：00-10：00. Note 2： Not setting cooking time after power on, the appliance will automatically shut down after working 10 hours, without buzzer reminding function. Cooking end time setting function In the state of function to be selected, press button “...
- Page 16 Pic 23 Cancel “Auto” function symbol display diagram(After cooking finished) For example, the system time is 0:00 like pic 19. Set cooking end time 0:30, like pic 20. When the time reaches 0:30, display screen shows system time, oven in use symbol“ ”...
- Page 17 time is well set. Whenever user wants to adjust the timer, in the working status, press “ ” three times to adjust the cooking period, or press “ ” four times to adjust the ending time. After setting is done, The display will change back to system time. For example, the system time is 0:00.
-
Page 18: Selecting A Cooking Function And Temperature
Selecting a cooking function and temperature When your appliance is connected to your mains supply for the first time, the power indicator light will come on, after selecting the cooking function and setting a temperature, the operating light will come on and the oven will start working, finally setting the cooking time;(the cooking time is from 0min to 120mins, revolving the knob in clockwise direction to the corresponding time on panel when setting the cooking time. - Page 19 The oven thermostat control knob sets the required temperature of the oven. It is possible to regulate the temperature within a range of 50 - 250°C. Turn the control knob clockwise. Oven operating light This light will come on to indicate that the oven’s heating elements are in operation.
-
Page 20: Troubleshooting
o Important: Be careful when opening the door, to avoid contact with hot parts of the oven and steam. o The drip tray handle should only be used to reposition the drip tray and NOT for removing it from the oven cavity. When removing the drip tray, you should ALWAYS use an oven glove. - Page 21 that you are cooking. You should also ensure that the food is placed in an adequately sized dish and that you use the drip tray where appropriate. Outer parts of the oven should only be cleaned with warm soapy water, using either a sponge or soft cloth.
- Page 22 Type-B(SMEG door structure) The steps of taking down glass of door: keep the door flat on table，Put your hand on bottom of glass of door and lift up,take off the button，Lift up the button which is on top of glass until the whole glass is took down. The steps of installing the glass of door Let the bottom of glass of door lean on the convex plate of door frame, aim at the button and press it.
-
Page 23: Environmental Note
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. - Page 24 Mühlenstrasse 8a, Berlin,14167, Germany www.gunter-hauer.eu e-mail: info@gunter-hauer.de...
Need help?
Do you have a question about the EOM 558 BT and is the answer not in the manual?
Questions and answers