Navitel E100 User Manual page 30

Manual setting of all route points
To plan a route, where the starting and the destination points are determined manually, first mark a point on the map where you
plan to start and press "Cursor" [1] to proceed to the "My route" screen. Tap on the information panel at the bottom of the screen
[2]. Press "Set start" in the "Properties" screen [3]. The GPS-receiver must be switched off. The point will be marked on the map as
a starting point. Select a destination point on the map: tap on the map to mark the point, press "Cursor" [4] and then press "Go!" in
the "My route" screen [5]. The program will offer 3 alternative routes [6]. Select the appropriate and press "Go!".
Fig. 1
Fig. 4
QUICK START GUIDE — NAVITEL E100
Fig. 2
Fig. 5
| 29
EN
Fig. 3
Fig. 6