Navitel E100 User Manual page 27

26 | USER MANUAL — QUICK START GUIDE
10 Street after
maneuver
11 Route
EN
12 Speed
13 Information panel By default, displays a set of gauges that provide information on remaining travel
14 Current street
15 GPS cursor
16 Indicator of
maneuver
17 Road regulations
The name of a street following the maneuver. Please note that if certain conditions
are met, the upcoming traffic lanes will be displayed instead.
Active route.
Road speed limit is displayed next to the current car speed. The program will notify
the driver in case of any speed deviations – orange colour block for established
speeding level (by default its 10 km/h), red one for higher value of speeding. It is
possible to set the speeding level for orange notification up to 30 km/h in the Alerts
section of Settings.
time, distance to the point of destination, and estimated arrival time. The selection of
gauges can be changed in the program settings.
The name of the current street (active only when connection with satellites is
established). If the map does not contain information about the active street name,
the direction of movement is displayed instead (North, South, West, and East).
Indicates current position of the device when the GPS receiver is turned on.
When passing the roads with two or more lanes this indicator displays information
about the permitted maneuver at the nearest intersection or turning point; progress
bar under the indicator displays the distance left to the described maneuver.
On the right side of the display program indicates the distance left to the closest
driving regulations. When approaching, the program displays the countdown to the
closest camera, road sign or marking.