Frame Guards - Cannondale MOTO CARBON Owner's Manual Supplement

FRAME GUARDS

Normal line and cable movement against the frame can wear
away painted finishes and decals. Overtime, cable rubbing can
wear into the frame itself causing very serious frame damage.
KF103/
(8 pcs)
CHAINSLAPPER
Replace the chainslapper if it is missing or damaged. Available as Cannondale kit KF092./
To apply the guard material :
1. Clean the frame with a mild detergent and wipe dry with
a clean towel. Do not use solvents or harsh chemicals
to clean the frame. OPTIONAL: Trim the adhesive guard
material to the shape required.
2. Remove the backing and position the guard under the
cable/ line.
3. Rub the guard firmly against the frame with your fingers
to fix it in place.
4. Periodically, recheck the guards and other areas of the
frame as you continue to ride. Replace the guards if they
wear out.
14
DROPOUTS
12mm MAXLE DROPOUTS
KP079/
THRU AXLE 135mm MAXLE
KP080/
135mm STANDARD QR DROPOUTS
KP078/
Both dropout kits include mounting hardware (chainring bolts)
125237.PDF
GROMMET
KF102/ - (QTY 10)
Loctite 242 (blue)
13 Nm, 115 In Lbs
Loctite 242 (blue)
13 Nm, 115 In Lbs
15