Frame Assembly - Cannondale Habit Owner's Manual Supplement

Habit - Owners Manual Supplement

Frame Assembly

IMPORTANT: During assembly of the rear suspension pivots on all frame sizes, tighten
the yoke to shock bolt last.
Use the following method to assemble the shock yoke on the XS size habit:
1. Assemble all components of the frame, leaving the shock and yoke extension unatta-
ched. Allow the suspension to rest under gravity.
2. Assemble the shock using the forward eyelet (frame side).
3. Assemble the shock yoke 90 from the side of the ST.
4. Rotate the yoke around the seat tube until it is inline with the rear shock eyelet and
install the shock-yoke bolt loosely.
5. Assemble the yoke to link hardware before tightening the shock-yoke bolt to torque.
134938 Rev 1.
18