Table of Contents
Advertisement
7-6. Adjustment of the X-Y table detector
7-6-1. Adjustment of the X-Y mechanical home position
The mechanical home position (No.1) is fixed at the center of the sewing area as the factory default
setting. The machine can be moved within the area (No.2) covered with diagonal lines.
<2>
<1>
<1>: Home position as the factory default <2>: Adjustable area
(1) After canceling the sewing area limit, change the mechanical home position.
(2) Press the
on the standard screen to open the MENU mode.
(3) Press the
->
->
[Cancellation of sewing area limit] in order.
(4) Select the
on the [Cancellation of sewing area limit] screen, and press the
.
(5) When turning the power off then, the setting of the sewing area limit is cancelled.
NOTE When modify the home positon somewhere other than the center of sewing area, please refer to
the instructions OPERATION PANEL technical manual [17] [Easy setting 3-(8)].
- 53 -
Advertisement
Table of Contents
