7-6. Adjustment of the XY table detector
XY table detecting position is front left corner of sawing area to the needle center. At the first origin
movement when turn the machine power on, XY table moves toward above position. After detection, XY
table is back to the home position as shown in the following figure.
NOTE When modify the home positon somewhere other than the center of sewing area, please refer to
the instructions OPERATION PANEL technical manual [17] [Easy setting 3-(8)].
<4>
<3>
500
Home position
<1>: X detect plate <2>: X detector <3>: Y detect plate <4>: Y detector <5>: Needle
<5>
500
1000
<1>
<2>
- 40 -
<5>
1000
Detecting positon