Maintenance - Hoover Pet Max Complete User Manual

Maintenance

Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 1-800-844-9200 prior to continuing use.
Hoover Pet Max Complete vacuums should have regular maintenance checks to maintain optimal performance and suction.
®
Dirt Cup Release
Empty Dirt Cup
10
NOTICE:
A Thermal Protector has been designed into your cleaner to protect it from overheating.
When the Thermal Protector activates, the cleaner will stop running. If this happens proceed as follows:
1. Turn the cleaner OFF and unplug it from the electrical outlet.
2. Empty the dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, rinsable filter and HEPA filter for any obstructions. Clear
obstructions if present.
4. When the cleaner is unplugged and the motor cools off for 30 minutes, the Thermal Protector will deactivate and cleaning may
continue. If the Thermal Protector continues to activate after following the above steps, your cleaner needs servicing. Refer to the
Warranty section in the user manual for servicing information.
To reduce the risk of personal injury, unplug before cleaning or servicing.
Emptying the Dirt Cup
1. Remove the dirt cup by pressing the dirt cup release button.
2. Hold the dirt cup over your trash can and press the dirt cup trap door release to empty the dirt cup.
TIP: Empty the dirt cup after every use to maintain optimal perfor-
mance.
WARNING
WARNING
Do not use vacuum without dirt cup and dry filters.