Hoover Steam complete pet Quick Start Manual

QUICK START GUIDE
1
Plug in your Steam Complete Pet
and turn it on. Allow 60 seconds
for your unit to heat up, and adjust
both dials to your desired setting.
PRO TIPS
TO ENGAGE STEAMSTREAM
Press the button on floor head to
activate, and squeeze trigger to
release the steam. Press button
again to deactivate.
2
Adjust steam dial to desired
setting. Utilize the Supplemental
water tank by turning dial to
large area when cleaning large
spaces and turn the dial to
small area for quick cleaning.
TO RELEASE THE TILE AND GROUT
SCRUB BRUSH
Place foot on outer floor head and
gently pull away steam cleaner.
3
Pull trigger in short bursts to
produce steam and clean. To
prevent over saturating floors,
avoid holding down the trigger
continuously.
FOR BEST PERFORMANCE
Use distilled water.