GETTING TO KNOW YOUR CLEANER Effortless cleaning with COrD sTORaGE HAnDlE your new Hoover SWIvEl HOOK SUPPly COrD ClEAnEr DUsTInG BRUsH bODy On/Off SWITCH GROOMInG nOzzLE DOOr rElEASE PAD CaRRyInG HanDLE FlExIblE HOSE HOSE SUPPOrTS HOSE rETAInEr BaG DOOR ClEAnEr...
CarPET CarE COnTrOL SELECTOr PrEParing TO USE YOUr CLEanEr The carpet care control selector raises and lowers the height of the nozzle. Ensure that the cleaner is in the upright (parked) position and move the selector to the required setting for the carpet type or floor covering.
CLEaning TOOLS* CHanging THE DiSPOSaBLE Bag imPOrTanT: When using cleaning tools, the cleaner must be kept imPOrTanT: Switch cleaner off and remove plug in the upright (parked) position, particularly when cleaning stairs. from electricity supply before changing the bag. Your The carpet height selector should also be set to tool mode: cleaner is supplied with a bag already fitted.
imPOrTanT: For optimum cleaning performance, always keep CLEaning THE FiLTErS* your filters clean. Pre- motor filter Exhaust filter The pre-motor filter should be washed every three months. The exhaust filter should be washed every month. The Carbon filter is normally maintenance free, this component should not be washed.
CLEaring a BLOCKagE CHanging BELT Or BrUSHES Refit brush assembly • Hold the brush assembly and stretch the belt until imPOrTanT: Switch the cleaner off imPOrTanT: Switch cleaner off and remove plug from electricity supply brush mountings slot and remove the plug from the elec- before checking the brushes or remov- down into the cleaner tricity supply before dismantling...
If so, it will take about 30 minutes to reset itself. If there is any doubt call the Hoover service Office for advice. They may be able to assist you over the telephone. A service charge will be made if the cleaner is...