Advertisement
Quick Links
Service Instructions
Hoover SmartWash- SmartWash Pet
SmartWash Model #: FH52000GB, FH52013, FH52014, FH52050, FH52003VPC, FH52050V,
FH52014V, FH52000V, FH52000VGB, FH52000VFD, FH52001V, FH52040VCD, FH52023V
SmartWash Pet Model #: FH53000, FH53000PC, FH53000PDI, FH53010, FH53040DI, FH53050,
FH53000VPC, FH53050V, FH53050VPD, FH53000V, FH53000VPD, FH53010V, FH53040VCD,
DUFH53000, DUFH53000T, DUFH53000VGL, DUFH53000VTG
TO VIEW PARTS SCHEMATICS PLEASE VISIT "PARTS CATALOG" THROUGH THE DEALER
PORTAL HOME PAGE.
Advertisement
Related Manuals for Hoover SmartWash FH52000GB
Summary of Contents for Hoover SmartWash FH52000GB
- Page 1 Service Instructions Hoover SmartWash- SmartWash Pet SmartWash Model #: FH52000GB, FH52013, FH52014, FH52050, FH52003VPC, FH52050V, FH52014V, FH52000V, FH52000VGB, FH52000VFD, FH52001V, FH52040VCD, FH52023V SmartWash Pet Model #: FH53000, FH53000PC, FH53000PDI, FH53010, FH53040DI, FH53050, FH53000VPC, FH53050V, FH53050VPD, FH53000V, FH53000VPD, FH53010V, FH53040VCD, DUFH53000, DUFH53000T, DUFH53000VGL, DUFH53000VTG TO VIEW PARTS SCHEMATICS PLEASE VISIT “PARTS CATALOG”...
- Page 2 Troubleshooting A. Unit Leaking 1. Clean Water Tank and Dirty Water Tank are overfilled or not secure. (1) Check to ensure all tanks are properly filled or empty (dirty water tank) (2) Ensure the tanks are firmly placed into the unit and there are no gaps or looseness. 2.
- Page 3 4. Unit may need to be flushed. Add warm tap water to both the clean water tank and the solution tank. Make sure both tanks are seated firmly, clean any debris from the distributor bar and turn the unit ON, recline the handle.
- Page 4 3. There may be air trapped in the hose and pump. In this case, you will need to prime the pump by lowering the hose to the floor and holding the trigger for up to one minute. D. Unit Won’t Pick Up or Has Poor Suction 1.
- Page 5 Make sure the unit is NOT in the upright position (1) If the unit is in the upright position, the brushroll won’t spin. Tilt the unit backwards. 2. The brushroll stall protection has been activated. This happens when the brushroll gets jammed or clogged.