Watts AMES Deringer Installation, Operation And Maintenance Manual

Installation, Operation and
Maintenance Manual
Deringer
™
Indicator Flag
WA R NI N G
!
Read this manual BEFORE using this equipment.
Failure to read and follow all safety and use information can
result in death, serious personal injury, property damage, or
damage to the equipment.
Keep this manual for future reference.
WARNING
!
You are required to consult the local building and plumbing
codes prior to installation. If the information in this manual
is not consistent with local building or plumbing codes,
the local codes should be followed. Inquire with governing
authorities for additional local requirements.
Indicator Flag Open Position
NOTE: Tightening the set screw will rotate the indicator flag
stop counter clockwise. Loosening the set screw will rotate the
indicator flag stop clockwise.
1. It is important that the indicator flag on the shutoff valve is
fully parallel to the flow of water to make sure the shutoff
valve will properly open.
2. To adjust the indicator flag to its proper open position loosen
or tighten the set screw on the left side of the downstream
side of the gear box.
3. Using the handle adjust the indicator flag clockwise or
counter clockwise to align the indicator flag parallel to the
flow of water.
4. Once the indicator flag has been adjusted to fully open
retighten the set screw.
FLOW
1
Parallel
3
IOM-A-DeringerIndicatorFlag
2
set screw
4