4. Adjustments
<Step 3>
Flash Adjustment
(1) Adjust brightness so that the periphery of the gray chart
is as dark as possible.
(2) Adjust the camera so that the entire chart is
shown on the LCD monitor.
(3) Press the flash pop-up button.
When preparations (1) and (2) are complete,
press the [Enter] key.
|<-------------------------------------------------------->
|
// |
CAMERA
< Setup for Flash Adjustment >
--> Write the adjustment data to the flash ROM when adjustment has been completed correctly.
--> The [Flash Adjustment Complete] screen appears.
<Step 4>
Flash Adjustment is completed.
Press the [Enter] key to return to the
Adjustment Item Selection Screen.
90
1000 +-10mm
<---------------------Center--------------------->
FinePix S5200/S5600 Service Manual
<Fig. 4-14-2>
<Fig. 4-14-3>