Advertisement
b- How to format a USB drive as FAT32
Attention: You will lose all data on the USB drive
Connect the USB drive to a Windows PC
Open File Explorer
In the LEFT pane, right click the USB drive you want to format
From the pop-up menu select «Format... »
In the «File system» drop-down select «FAT32» (1)
Leave the other settings as default
Click «Start»
(1) If «FAT32» is not listed but «NTFS» or «exFAT» is you are most likely using a too large capacity USB
drive. Try a smaller capacity USB drive instead.
Top page
How to access the Service Menu
How to check DTC codes
How to Identify T2wG and Device
How to access the Repair Manual
How to install latest softwares
ID
NG Techdoc
Unknown issue
DA
DA & Ext. Box
Advertisement
