Other Settings; Setting Call Parameters - Zte ZXV10 ET301 User Manual

ZXV10 ET301 User Guide
4. After the configuration is completed, click Save.

4.2 Other Settings

4.2.1 Setting Call Parameters

This procedure describes how to set the call response mode, whether auxiliary video grab
is allowed, and the default call type for a terminal.
Prerequisite
The terminal is not engaged in a conference.
Steps
1. Press the Back key on the remote control to display the home page.
2. From the home page, select
see Figure
SJ-20190419091840-001|2019-04-08 (R1.0)
Parameter Description
Turn Server Addr. This parameter is set only when Work Mode is set to ICE.
Enter the information about the ICE Turn server. It is provided by the
Turn Server Port
administrator.
Turn Server User
Turn Server Pwd
StunServer Addr. This parameter is set only when Work Mode is set to ICE.
IP address of the ICE Stun server.
StunServer Port This parameter is set only when Work Mode is set to ICE.
Port ID of the ICE Stun server.
4-9.
> Conference > Call. The Call window is displayed,
4-16
ZTE Proprietary and Confidential