Dvd Player Operations - Blaupunkt DVD-ME R Manual

7. DVD Player Operations

After connection to the system is
completed according to Chapter 6, check
the operation by using the following steps.
STEP 1:
Press the POWER button. Starting logo is
then displayed on the screen.
When a disc is loaded
DISC LOADING
When a disc is not loaded
NO DISC
STEP 2:
Insert a disc, the player identifies disc type
automatically and disc type will be displayed in
the left top of TV screen. It will automatically
start to play.
STEP 3:
If the power button of the unit or remote
controller is pressed, the unit converts to
stand-by Mode. If the power button is pressed
again, the power turns on and the unit starts
to play.
15