Installation - Generalscan Scanbuddy GS-X3 Quick Start Manual

Installation

Step 1：Confirm your Android device or Windows Tablet support OTG
function first. Please note your device should provide at least 300maH
current from MicroUSB port to external device. If you cannot confirm,
please advise your device manufacturer.
Step 2：Hold GS-X3 with your hand and plug it into Android device or
Windows Tablet device's Micro USB port just like you charge your device
like normal. Make sure the smartphone USB port direction is same with
direction of Scanbuddy micro USB plug. Please plug the Scanbuddy into
smartphone slowly and tightly.
Step 3：When Scanbuddy successfully plug into your device, Android or
Windows table will find hardware automatically.
Step4： Install the Scanbuddy drivers on the Android or Windows tablet,
use the floating trigger button to scan the barcode.
Step 5：You can select three way to use the Scanbuddy.
31