Generalscan Scanbuddy GS-X3 Quick Start Manual page 6

Charging
Before using the Generalscan Bluetooth barcode companion which include
GS-M100BT, GS-M300BT, GS-M500BT for the first time, please charge the
battery using micro-USB cable until the red charging LEDs light is off. You
can plug the USB-A cable into any PC USB port or Android smartphone
charging adapter with 5V DC output.
Model
Interface
Charging Voltage
Battery Volume
Charging Time
Working Time(10s
interval trigger with
good decode)
GS-M100BT
Micro-USB
DC-5V 0.3A
500mAh
3-5 hour
12 hour
GS-M300BT
Micro-USB
DC-5V 0.3A
500mAh
3-5 hour
14 hour
GS-M500BT
Micro-USB
DC-5V 0.5A
550mAh
3-5 hour
13 hour
6