Tieline Genie Distribution User Manual page 91

2. Select Multicast Client to configure a client codec program.
3. Use the RETURN
KEYPAD to enter the multicast IP address you want to dial, using the
enter the periods in the IP address. The same multicast address and audio port must be used for
both the server and client programs. Next, press the down
and press
4. Press the down
5. Use the navigation buttons to select an algorithm profile, or manually select algorithm settings,
then press
6. Click to configure the Jitter Buffer from either Auto Jitter Adapt or Fixed Buffer Level , then
and enter the Jitter Depth, which must be between 12ms and 5000ms depending on the
algorithm you select, then press
Important Notes: Automatic or fixed jitter buffer settings can be adjusted on individual
client codecs as required. There is no jitter buffer setting on the server codec because it
never receives audio packets.
7. Select Protocol to select the audio protocol and adjust the Local Audio Port. Select UDP/IP
+RTP for RFC compliant IP streaming. Press
© Tieline Research Pty. Ltd. 2020
button to delete any numbers already entered, then use the numeric
.
navigation button to select Algorithm and press
.
.
Genie Distribution WNET Manual v3
navigation button to select Setup
to save settings.
91
or buttons to
.