Multicast Server And Client Programs - Tieline Genie Distribution User Manual

· File playback will occur automatically if the silence threshold parameters are breached;
if the codec is not connected for any reason file playback will commence. To stop file
playback open the Connections panel in the HTML5 Web-GUI, click to select the file
playback connection, then click Disconnect.
Configuring Rules
1. To configure new stream level rules click the drop-down arrow and select the preferred option
from those available. Click the blue Plus symbol
symbol
2. Click Save Program to complete configuration of the program. Alternatively, continue
through the wizard to configure audio streams for 2 x Multicast Client or 3 x Multicast
Client or 6 x Mono Multicast Client programs as required, then click Save Program.
3. Click Finish to exit the wizard.
4. Configure multicast server and multicast client programs and load all codecs with the
appropriate program.
Connections panel, or
multicast server program connection first and then connect multicast client codec programs
to begin receiving multicast streams.
20.22

Multicast Server and Client Programs

Genie Distribution and Genie Distribution with WheatNet-IP codecs support programs configured with
both multicast client and server capability simultaneously. Simply select the program to support both
server and client capability and configure the program as per the previous instructions in this user
manual.
© Tieline Research Pty. Ltd. 2020
to remove a rule.
Select and connect audio streams
dial the program manually
Genie Distribution WNET Manual v3
to add a new rule and click the Minus
using the codec front panel. Dial the
281
in a program using the