Sony HDVF-EL100 Operation Manual page 43

Page Menu Item
02 TALLY/IND UP TALLY
UP TALLY DIM
TALLY/IND
TALLY/IND DIM
03 PEAKING PEAKING MODE [STD]/PLUS
COLOR/AREA
SEL
POSITION
PEAKING UP
COLOR DETECT EXEC
HUE PHASE
HUE WIDTH
SAT WIDTH
FREQUENCY
RANGE
Settings Function
(default in [ ])
OFF/[ON] For controlling the external tally lamp.
1 to [5] to 10
For setting the brightness of the external tally lamp.
Raising the value increases the brightness; lowering the
value decreases the brightness.
OFF/[ON] For activating all tally lamps and indicators (ON) or
activating only the STATUS indicator (OFF).
1 to [5] to 10
For setting the brightness of the tally lamps and indicators.
Raising the value increases the brightness; lowering the
value decreases the brightness.
For selecting a peaking mode.
[COLOR]/AREA/
For selecting a peaking plus mode.
BOTH
[CNT]/UPPER/
a) For selecting the effective PEAKING area when "AREA" or
RIGHT/LOWER/ "BOTH" is selected in "COLOR/AREA SEL".
LEFT The "POSITION" settings are linked to those of the
MAGNIFICATION menu.
[OFF]/ON
For selecting whether to increase the peaking level by +6 dB
or not when "PLUS" is selected in "PEAKING MODE".
For detecting the color of which its edges are to be
enhanced.
This feature is enabled only when COLOR or BOTH is
selected.
[0] to 359 For specifying the hue center position of which edge
enhancement is to be performed.
–99 to [0] to 99 For specifying the hue range of which edge enhancement is
to be performed.
–99 to [0] to 99 For specifying the saturation range of which edge
enhancement is to be performed.
L/[M]/MH/H For specifying the center frequency of edge enhancement
signals.
1 to [2] to 3 For specifying the variability of edge enhancement level.
ON: Enables external tally lamp
OFF: Disables external tally lamp (Does not light up even
when the camera receives red tally signals)
STD: Standard mode
PLUS: PEAKING PLUS mode
COLOR: Sharpens the edges for the selected color only
AREA: Sharpens the edges for the selected area only
BOTH: Sharpens the edges for the selected color and
area only
CNT: Sharpens the edges of the center area
UPPER: Sharpens the edges of the upper area
RIGHT: Sharpens the edges of the right area
LOWER: Sharpens the edges of the lower area
LEFT: Sharpens the edges of the left area
OFF: RANGE setting
ON: RANGE setting +6 dB
43
Using the Menu