V-ZUG 11001 Quick Start Manual

V-ZUG Ltd.
Industriestrasse 66, P. O. Box 59, 6301 Zug
Telefon 041 767 67 67, Fax 041 767 63 60
vzug@vzug.ch, www.vzug.ch
Only trained and qualified personnel should install or replace this equipment.
1. Disconnect appliance from mains power
supply (without current).
2. Remove cover plate.
Loosen 2 screws
Ex works state:
3. Remove aqua-stop cover, loosen 1 screw
and unhook cover.
4. Pull 1.5m aqua-stop out of control unit.
Release cable from cable ties and clips.
5. Disassemble
6. 3m aqua-stop, pull cable through to clips
above valve block, positioning exactly as
before. Cable must run straight up.
7. Next, mount cable as follows:
j11001_514d-0.doc
printed
Installationsanleitung
WasseroptionenAdora
11001 ... 11006
01.07.2013
1
J11001.514D-0
erstellt
06.06.2013 BOT
geändert 06.06.2013
geprüft
1 / 2
01.07.2013 RHI