User's Guide
Specifications for Plastic Cards for Scanning from the
Card Slot
These are the specifications for plastic cards that you can load into the scanner from the card slot.
Note:
❏ You can scan plastic cards from the card slot at the front. You cannot scan from the ADF.
❏ Although you cannot scan card from ADF, you can leave the ADF as the Document Source setting in Epson Scan 2.
Size
Card Type
ISO7810 ID-1 Type
Without embossing
54.0×85.6 mm
(2.1×3.3 in.)
Types of Cards that Require Attention
The following types of cards may not be successfully scanned.
❏ ISO7810 ID-1 Type plastic cards with emboss (the thickness should be 1.24 mm (0.05 in.) or less)
❏ ISO7810 ID-1 size laminated cards (the thickness should be 0.6 mm (0.02 in.) or less)
Related Information
"Placing Plastic Cards in the Card Slot" on page 41
&
Placing Standard Size Originals in the ADF
Specifications of Standard Size Originals
These are the specifications for standard size originals that you can load into the ADF.
Specifications of Originals and Placing Originals
Thickness
1.0 mm (0.04 in.) or
less
21
Loading Capacity
Loading Direction
1 card
Vertical (Portrait)