Chapter 3 - Installing Devices
Removing the Chassis Cover
Please observe the following guidelines and follow the procedure to open the system.
1.
Make sure the system and all other peripheral devices connected to it have been powered
off.
2.
Disconnect all power cords and cables.
3.
The 14 mounting screws on the bottom and two sides of the system are used to secure the
cover to the chassis. Remove these screws and then put them in a safe place for later use.
Mounting screw
Mounting screw
Mounting screw
Mounting screw
User's Manual | VC230-AL
4. After removing the mounting screws, lift the chassis cover to open the system. To access the
SODIMM and Mini PCIe and SIM card slots, remove the four screws to uninstall the power
board.
Chapter 3
SATA mount bracket
& Mounting screw
Power board
SATA mount bracket
& Mounting screw