Table of Contents
Advertisement
Installing a SATA Drive
The system supports one SATA drive. To install a SATA drive, uninstall the SATA mount bracket
from the system.
Install the SATA on the SATA mount bracket and place the installed SATA drive back in the sys-
tem and secure it with 4 mounting screws.
SATA mount bracket screw
User's Manual | VC230-AL
SATA mount bracket
& Mounting screw
Power board
SATA mount bracket
& Mounting screw
Installing a SODIMM
The system supports one DDR3L-1600/1866MHz SODIMM up to 8GB. To install a memory mod-
ule, grasp the memory module by its edges and align the module's notch with the socket's notch;
then insert the memory into the socket at an angle and push it down until you feel a click.
SODIMM
Note:
The SODIMM socket only accepts DDR3L memory modules.
Chapter 3
Mounting screws
Power board
Mounting screws
Advertisement
Table of Contents
