Table of Contents
Advertisement
Audio Configuration
This section configures the audio settings.
Audio Controller
Control the detection of the high-definition audio devices.
Disabled
High-definition audio devices will be unconditionally disabled.
Enabled
High-definition audio devices will be unconditionally enabled.
User's Manual | VC230-AL
SATA Configuration
This section configures the SATA controllers and hard disks.
SATA Controller(s)
Enable or disable Serial ATA controllers.
SATA Speed Selection
Select Serial ATA device speed: Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s), Gen 3 (6 Gbit/s) or
auto.
Serial ATA Port 0 and 1
Enable or disable each serial ATA port.
SATA Port 0: Controls the SATA signal of the SATA port on the system board.
SATA Port 1: Controls the SATA signal of the half-size mini PCIe slot.
Chapter 5
Advertisement
Table of Contents
