Table of Contents
Advertisement
Specifications
This WARNING symbol, when found in the hardware guide, indicates that the fluorescent
display module contains a high voltage source (70V DC). Display module capacitors store
energy and require more than one minute of discharge time to avoid personal injury or
equipment damage. Handle the display module with caution when power is applied.
GENERAL
The TAP-100-2X16 provides effortless visibility into full duplex networks with easy connectivity
and allows resource sharing. The table below shows the TAP-100-2X16 capacity, network type,
network connectivity, product weight and shipping weight.
IMPORTANT
Do not exceed 90 meters network segment length for a single TAP-100-2X16 unit installation and 80 meters
network segment length for subsequent daisy-chain TAP-100-2X16 unit installations.
NOMINAL POWER REQUIREMENTS
NOMINAL POWER DISSIPATION
OPERATING TEMPERATURE
STORAGE TEMPERATURE
DIMENSIONS
Nominal Power Requirements. The TAP-100-2X16 has been provided with an external power
supply requiring 100–240V AC at 50–60Hz. This supply is provided as a standard, no charge accessory.
The DC voltage and current output ratings is 5V DC at 5.0A. This power supply is provided with
Safety Extra-Low Voltage (SELV) circuits which separate hazardous voltages with a grounded system
on the primary input. The power supply has been certified by UL, CUL, and TUV and is CE approved.
FEATURE
HUMIDITY
WEIGHT
SPECIFICATION
100–240V AC at 50–60Hz / 5V DC at 5.0A
Safety Extra-Low Voltage (SELV) power supply included
Certified by UL, CUL, and TUV; CE approved
5W
0° to 40°C (32° to 104°F)
-30° to 65°C (-22° to 149°F)
Less than 95% non-condensing
(H) 44 mm x (W) 483 mm x (D) 260 mm
(H) 1.75" x (W) 19.00" x (D) 10.25"
(includes integral 19" rack mount brackets)
unit: 4.99kg (11lbs)
shipping: 7.71g (17lbs)
9
Advertisement
Table of Contents
