Cleaning - Wahl LITHIUM PRO Series Instructions Manual

ATTACHMENTS
This appliance can be operated with attachment combs.
Attachment combs can be used to extend the cutting
length range. To attach the combs, hold comb with teeth
up and snap it firmly to the bottom of the clipper blade.
(fig. 3) For uniform cutting, allow the clipper to cut its
way through the hair. Do not force it through at a faster
rate.

CLEANING

Always disconnect the appliance from the wall socket
before any cleaning operation.
• To clean the unit, use either a clean dry or dampened
cloth. Do not use abrasive cleaning agents or scrub
pads. Do not use alcohol or solvents.
• To remove hair from between the blades, use the
cleaning brush provided.
• After each use, blades should be cleaned and oiled.
Put a small drop of Wahl Clipper Oil between the
blades while the trimmer is running. Wipe off excess
oil so it does not run into the motor. (fig.4)
• Never immerse the appliance in water or any other
liquid.
LITHIUM PRO SERIES CLIPPER
13