Wahl LITHIUM PRO Series Instructions Manual page 12

LITHIUM PRO SERIES CLIPPER
should be parallel to the skin surface. Do not allow
the sharp blade tips to go into the skin as this will
cause injury.
• During clipping it may be necessary to clean and oil
the blades. Place a small drop of Wahl Clipper Oil on
the blades while the clipper is running (fig. 4).
• To prolong blade life, do not use the appliance on
dirty or wet coats.
• Be careful not to drop the appliance or to damage or
break any teeth on the blades. A new blade should be
purchased if the teeth are damaged.
• Always oil the blades and replace the blade guard
when the clipper is not in use.
• Keep the cord untwisted and unobstructed. When
stored, the cord should be coiled and the unit placed
in a dry place, away from children.
• Do not store the appliance in a wet or moist
environment.
• Do not touch any of the internal mechanisms. If the
unit should need repair, do not repair it yourself.
Return it to Wahl UK Ltd.
TAPER LEVER
Some clippers are equipped with an adjustable taper
lever that changes the closeness of your cut. When the
lever is in the uppermost position, the blades will give
the closest cut (fig. 2a) Pushing the lever downward
gradually increases the cutting length (fig. 2b)
12